|
|
|
|
UNILIT 80 (DOMUS MR)
Mortar for the construction of foundations and lime floors DESCRIPTION
Mortar
with fibre armament for the construction of floors, based on natural hydraulic
lime, and selected light-weight aggregates.
A high thermal insulation is guaranteed due to the composition of this
mortar. APPLICATION
UNILIT
80 is a low-density lime mortar, used as a filler between the subsoil and the
actual lime floor. UNILIT 80 is an
ideal product to cut in notches for electrical wiring and water pipes.
In this way, a smooth surface is created on which the lime flooring can
be constructed. As the mortar is
light-weight, the overall construction will not be made heavier, then necessary.
UNILIT 80 is the ideal basis for the construction of lime or tiled
floors. TECHNICAL
PROPERTIES
Density
700 kg/m³ Consumption
7 kg/m²/cm Compressive
strength
2 N/mm² Proportion
water/UNILIT 80
0.90 l/kg pH > 10.5 Thermal
conductivity
l = 0.12 W/m.K Storage 6 months PREPARATION
UNILIT
80 has to be mixed with clean water, with the help of an automatic system for
the measurement of the dose. UNILIT
80 is directly applied on a clean surface and on the wiring and piping systems
and has to be finished with a laying-on trowel or a drag. PACKING
13
kg bags REMARKS
In case of doubt regarding the substrate, consult our technical service department. The material must be stored dry and frost free above ground. The maximum storage time is 6 months. Our advice and information is given in good faith and depending on the latest developments of our products. We guarantee the constant quality of our products, but do not accept any liability concerning the application. |
|
Arte Constructo bvba - Molenberglei 18 - B- 2627 Schelle (Belgium) tel: +32 (0)3 880.73.73 fax: +32 (0)3 880.73.70
made by stevensschool
|