|
|
|
|
UNILIT B-FLUID XB
GROUTING MORTAR OF NATURAL HYDRAULIC LIME FOR BONDING FRESCOS AND
DELAMINATED PLASTERS DESCRIPTION
UNILIT
B-FLUID XB is an extremely fine, ready mixed mortar based on an inorganic binder
which is a natural hydraulic lime, and a very fine filler.
Pozzolanas can be added to it, if necessary or desired, to adjust the
degree of hydraulicity of the product. UNILIT
B-FLUID XB is characterized by a low content of soluble salts, a low modulus of
elasticity and high vapour permeability. This
binder is perfectly stable and carefully prepared so as to limit problems of
microfissures and premature drying out. APPLICATION
This
ultra fine mortar is especially meant for injection in between a detached mortar
or fresco and their substrate. With
the help of a syringe, the B-FLUID XB is injected in holes previously drilled in
the loose render. The injection is
recommended to be commenced at the lowest point of the detached mortar, working
upwards in bands of about 100 mm height, to avoid an overpressure and a complete
detachment of the loose mortar. The
binder UNILIT B-FLUID XB will store a large quantity of salts which may come
from the substrate and migrate due to humidity.
B-FLUID XB has this capacity due to its great natural porosity and its
own low soluble salt content. This
guarantees the performance and extended life of the mortar. TECHNICAL PROPERTIES
Delivery
form
powder Density
1.200 kg/m³ pH
> 10,5 Fire
classification
non-flammable (M.O) Granular
size
£0.01
mm Mixing
time
5 to 8 minutes COMPARISONSalt
deposits in % and measure of electrical conductivity
COLOUR
Beige PREPARATION
After
the drilling, rinse with demineralised or distilled water. B-FLUID XB is mixed
with 15 to 32 % of clean water. The
mixing can be done either manually or mechanically, during 5 to 8 minutes. The mortar is inserted with a syringe, with a maximum
pressure of 1 to 2 bar. The
mortars are workable for 2 hours. The
drying period is 24 to 48 hours. The
mortars have to be protected from frost for 48 to 72 hours after their
application. PACKING
25
kg bags REMARK
In
case of doubt regarding the substrate, consult our technical department.
The product must be stored in a dry and frost free place.
The maximum storage time is 3 months.
Our advice and information are given in good faith and depending on the
latest developments of our products. We
guarantee the constant quality of our products, but do not accept any liability
concerning their application. |
|
Arte Constructo bvba - Molenberglei 18 - B- 2627 Schelle (Belgium) tel: +32 (0)3 880.73.73 fax: +32 (0)3 880.73.70
made by stevensschool
|